Документация
ШИМ-контроллер STRY6476
У поставщика
ПроизводительSanken
КатегорияШИМ-контроллеры
У поставщиков
42 шт.
Норм. уп.: 52
Цены поставщиков
Склад 13
В наличии:42 шт
Срок поставки: до недели
Норм. уп.: 52
Минимальная партия: 4 шт
| Кол-во, шт. | Цена, ₽ |
|---|---|
| от 1 | 203,85 |
| от 4 | 200,62 |
| от 8 | 196,29 |
| от 16 | 189,84 |
| от 31 | 179,72 |
Описание
ШИМ-контроллер STRY6476 от Sanken предназначен для импульсных источников питания (SMPS). Выполнен в корпусе TO220F/7, поставляется в тубе. Применяется в блоках питания для бытовой и промышленной электроники.
Технические характеристики
| Корпус | TO-220F-7L (FMS207) |
| Тип монтажа | Выводной |
| Применение | Switching Power Supplies for Digital appliance, OA equipments, Home appliance, Industry Machines, Communication Devices |
| Maximum on time | 31µs to 41µs |
| Startup current | -2.4mA to -0.5mA |
| Avalanche energy | 330mJ |
| Olp bias current | -27µA to -13µA |
| Switching time max | 500ns |
| Темп. хранения | -40 to +125°C |
| Max feedback current | -315µA to -135µA |
| Ocp pin voltage range | -1.5V to +2.0V |
| Частота колебаний | 17.5kHz to 25.0kHz |
| Operation stop voltage | 9.0V to 11.3V |
| Channel temperature max | +150°C |
| Input power no load max | 0.1W |
| Ocp pin leakage current | -260µA to -40µA |
| Operation start voltage | 14.4V to 18.4V |
| Тип упаковки | Tube (туба) |
| Bd pin max clamp voltage | 6.3V |
| Bd pin min clamp voltage | -0.075V |
| Mosfet on resistance max | 1.3Ω |
| Bottom skip start voltage | 3.8V to 4.8V |
| Control power dissipation | 0.8W |
| Drain leakage current max | 300µA |
| Standby operation voltage | 0.80V to 1.25V |
| Startup current after olp | -1.10mA to -0.15mA |
| Control supply voltage max | 32V |
| Leading edge blanking time | 210ns |
| Mosfet drain source voltage | 850V |
| Power off threshold voltage | 8.2V to 10.8V |
| Standby state start voltage | 5.7V to 6.8V |
| Bd pin inflowing current max | 2.0mA |
| Circuit current in operation | 3.5mA to 5.5mA |
| Fb pin inflowing current max | 8.0mA |
| Minimum on time steady state | 1.04µs to 2.16µs |
| Mosfet max switching current | 13.2A |
| Описание (англ.) | SMPS |
| Adj pin inflowing current max | 3.0mA |
| Bd pin outflowing current max | -2.0mA |
| Темп. окр. среды | -20 to +115°C |
| Bottom skip threshold voltage 1 | -0.720V to -0.605V |
| Bottom skip threshold voltage 2 | -0.485V to -0.381V |
| Bottom skip threshold voltage 3 | -0.205V to -0.085V |
| Max voltage in feedback control | 4.90V to 6.00V |
| Standby state detection voltage | 1.40V to 1.85V |
| Circuit current in non operation | 10µA to 50µA |
| Olp latched shutoff bias current | -1.5mA to -0.5mA |
| Mosfet drain current single pulse | 13.2A |
| Operating inner flame temperature | -20 to +115°C |
| Soft start operation stop voltage | 2.0V to 2.6V |
| Startup circuit operation voltage | 55V to 100V |
| Startup circuit pin voltage range | -1.0V to V_DSS |
| Bottom skip detection bias current | -27µA to -13µA |
| Minimum on time input compensation | 0.57µs to 1.33µs |
| Olp auto restart threshold voltage | 6.3V to 7.3V |
| Ovp operation power supply voltage | 26.0V to 31.0V |
| Quasi resonant threshold voltage 1 | 0.12V to 0.60V |
| Quasi resonant threshold voltage 2 | 0.01V to 0.32V |
| Thermal resistance channel to frame | 1.0°C/W to 1.5°C/W |
| Mosfet power dissipation no radiator | 1.3W |
| Olp latched shutoff threshold voltage | 8.6V to 10.2V |
| Soft start operation charging current | -148µA to -71µA |
| Latch circuit release power supply voltage | 6.2V to 8.9V |
| Overcurrent detection threshold voltage steady | -0.975V to -0.875V |
| Mosfet power dissipation with infinite radiator | 29W |
| Input compensation detection threshold current 1 | -575µA to -425µA |
| Input compensation detection threshold current 2 | -565µA to -375µA |
| Overcurrent detection threshold voltage input comp | -0.904V to -0.656V |
Заметили ошибку в описании или параметрах?